Display Assembly - HP Pavilion 11 x360 Maintenance And Service Manual

Display assembly

Description
Display assembly for use in model numbers Pavilion 11-n000 x360 ~ Pavilion 11-n099 x360 with WWAN
Display assembly for use in model numbers Pavilion 11-n000 x360 ~ Pavilion 11-n099 x360 without
WWAN
Display assembly for use in model numbers Pavilion 11-n100 x360 ~ Pavilion 11-n199 x360 with the
following WLAN module: Intel Dual Band Wireless-AC 3160 802.11 ac 1x1 WiFi + BT 4.0 Combo Adapter
Display assembly for use in model numbers Pavilion 11-n100 x360 ~ Pavilion 11-n199 x360 without the
following WLAN module: Intel Dual Band Wireless-AC 3160 802.11 ac 1x1 WiFi + BT 4.0 Combo Adapter
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
To remove the display assembly:
1. Release the wireless antenna cables from the clips (1) built into the base enclosure.
NOTE:
2. Disconnect the webcam cable (2) from the system board.
58 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page
The number of antenna cables may vary.
31).
54).
Spare part number
756108-001
755730-001
800298-001
802266-001