HP Pavilion 11 x360 Maintenance And Service Manual page 71

c. Remove the cable from the tape (3) and clips (4) that secure it to the display enclosure , and then
lift the display cable from the display enclosure (5).
5. To remove the sensor board:
NOTE: The sensor board is available using spare part number 788218-001.
a. Disconnect the cable from the board (1).
b. Remove the Phillips PM2.0×3.0 screw that secures the board to the display enclosure (2).
c. Remove the sensor board from the display (3).
Reverse this procedure to reassemble and install the display assembly.
Component replacement procedures 63