Hard Drive - HP Pavilion 11 x360 Maintenance And Service Manual

Hard drive

NOTE: The Hard Drive Hardware Kit, spare part number 755740-001, includes the hard drive bracket, hard
drive connector cable, and screws.
The Solid-State Drive Hardware Kit, spare part number 783845-001 includes the connector cable, top and
bottom brackets, PCBA, and screws.
Description
750-GB, 5400-rpm, 7.0-mm
500-GB, 5400-rpm, 7.0-mm
500-GB, 5400-rpm, 8 GB hybrid SSD, 7.0-mm
Before removing the hard drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery.
Remove the hard drive:
1. Disconnect the hard drive connector cable (1) from the system board.
2. Remove the Phillips PM2.0×7.0 screw (2) that secures the hard drive and battery to the computer.
3. Remove the three Phillips PM2.0×3.0 screws (3) that secure the hard drive to the computer.
Bottom cover on page 31).
Spare part number
752099-001
778186-005
732000-005
Component replacement procedures 41