Table of Contents
Advertisement
WARNING:
power supply blank to cool before touching it.
To replace the component, reverse the removal procedure.
Power supply backplane
WARNING:
remove the power cord to remove power from the server. The front panel Power On/Standby
button does not completely shut off system power. Portions of the power supply and some internal
circuitry remain active until AC power is removed.
To remove the component:
Power down the server (on page 25).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove all power supplies
3.
Extend the server from the rack (on page 25).
4.
Remove the access panel
5.
To reduce the risk of personal injury from hot surfaces, allow the power supply or
To reduce the risk of personal injury, electric shock, or damage to the equipment,
("AC power
supply" on page 35).
("Access
panel" on page 29).
Removal and replacement procedures 36
Advertisement
Table of Contents
