Table of Contents
Advertisement
Extend the server from the rack.
2.
After performing the installation or maintenance procedure, slide the server back into the rack, and then
3.
press the server firmly into the rack to secure it in place.
WARNING:
latches and sliding the server into the rack. The sliding rails could pinch your fingers.
Remove the server from the rack
To remove the server from an HP, Compaq branded, telco, or third-party rack:
Power down the server (on page 25).
1.
Extend the server from the rack (on page 25).
2.
Disconnect the cabling and remove the server from the rack. For more information, refer to the
3.
documentation that ships with the rack mounting option.
Place the server on a sturdy, level surface.
4.
To reduce the risk of personal injury, be careful when pressing the server rail-release
Removal and replacement procedures 26
Advertisement
Table of Contents
