Reading T He Led St At Us - Datamax APEX 2 User Manual

1 .3 Re a din g t h e LED St a t u s
The illust rat ion below point s out t he locat ion of t he LED indicat ors described in
Table 1, below, det ails t he LED indicat or st at us. Refer t o Figure 1 t o locat e t he < ON/ OFF> and
< FEED> push but t on swit ches and t he AC adapt er socket
st at us LEDs on t he front of t he print er.
LED
LED # 1
Communication
LED # 2
Battery
LED # 3
Magnetic Card
Reader
&
Printer Error
Note: Refer to the troubleshooting guide to determine error or fault condition.
FIGURE 4: LED INDICATOR LOCATIONS
Ta ble 1 - Re a din g t h e LED St a t u s
Status Condition
Flashing
GREEN
Steady
Flashing
BLUE
Steady
Flashing
AMBER
Steady
RED Steady
AMBER Steady
Steady
GREEN
Steady
RED
Flashing
.
Figure 4 provides t he locat ion of t he
Function
Power is ON and the printer is in RS232 or IRDA
mode
Communicating with host
Power is ON and the printer is in Bluetooth mode
Transmitting/receiving
Power is ON and the printer is in 802.11b/g mode
Transmitting/Receiving
Low power indication
Battery being charged. The LED will turn off when the
battery is fully charged

Indicates that MCR is ready to accept data

Indicates that SCR is ready to accept data

Printer Error. The printer is out-of-paper or Paper
door is open.

MCR/SCR faulty condition
Indicates the print head is hot and printing is paused
5
Table 1