Punctured Tire - Chevrolet 2010 Cobalt Owner's Manual

Using the Tire Sealant and Compressor
Kit to Temporarily Seal and Inflate a

Punctured Tire

When using the tire sealant and compressor kit
during cold temperatures, warm the kit in a heated
environment for 5 minutes. This will help to inflate
the tire faster.
6-86
Always do a safety check first. See If a Tire Goes Flat
on page 6 82. Do not remove any objects that have
penetrated the tire.
1. Remove the tire sealant and compressor kit
from its storage location. See Tire Sealant and
Compressor Kit Storage on page 6 91.
Make sure the on/off button (D) is in the
off (O) position.
2. Unwrap the sealant/air hose (G) and the power
plug (C).
3. Place the kit on the ground.
Make sure the tire valve stem is positioned close to
the ground so the hose will reach it.
4. Remove the valve stem cap from the flat tire by
turning it counterclockwise.
5. Attach the sealant/air hose (G) onto the tire valve
stem. Turn it clockwise until it is tight.
I n f o r ma t i o n P r o v i d e d b y :