Transferring A Call; Bluetooth System - Chevrolet 2010 Cobalt Owner's Manual

Muting a Call
During a call, all sounds from inside the vehicle can be
muted so that the person on the other end of the call
cannot hear them.
To Mute a call
g
1. Press . The system responds with Ready
followed by a tone.
2. Say Mute Call . The system responds with Call
muted .
To Cancel Mute
g
1. Press . The system responds with Ready
followed by a tone.
2. After the tone, say Mute Call . The system
responds with Resuming call .
4-82

Transferring a Call

Audio can be transferred between the in vehicle
Bluetooth system and the cell phone.
To Transfer Audio to the Cell Phone
During a call with the audio in the vehicle:
g
1. Press . The system responds with Ready
followed by a tone.
2. Say Transfer Call. The system responds with
Transferring call and the audio will switch from
the vehicle to the cell phone.
To Transfer Audio to the In-Vehicle

Bluetooth System

The cellular phone must be paired and connected
with the Bluetooth system before a call can be
transferred. The connection process can take up to
two minutes after the key is turned to the ON/RUN or
ACC/ACCESSORY position.
During a call with the audio on the cell phone,
g
press for more than two seconds. The audio
switches from the cell phone to the vehicle.
I n f o r ma t i o n P r o v i d e d b y :