Punctured Tire - Chevrolet Equinox Fuel Cell Owner's Manual

Using the Tire Sealant and Compressor
Kit to Temporarily Seal and Inflate a

Punctured Tire

Follow the directions closely for correct sealant usage.
1. Do a safety check before proceeding. See If a
Tire Goes Flat on page 5-35.
2. Inspect the damaged tire.
The sealant cannot seal sidewall damage, large
punctures, or a tire that has unseated from
the wheel. See OnStar
your Dealer Relationship Manager (DRM).
Do not remove any objects that have penetrated
the tire.
5-38
®
on page 7-6 or contact
3. Place the tire sealant and compressor kit on the
ground and unwrap the sealant/air hose (G) from
the side of the compressor.
4. Remove the valve stem cap from the flat tire by
turning it counterclockwise.
5. Attach the sealant/air hose (G) onto the tire valve
stem. Turn it clockwise until it is tight.
Make sure the sealant and compressor kit On/Off
switch (D) is in the O (off) position.
6. Remove the air compressor accessory plug (C)
from the unit.