Taillamps And Turn Signal Lamps (Coupe) - Chevrolet 2010 Cobalt Owner's Manual

4. Pull the old bulb straight out.
5. Push the new bulb straight in until it clicks.
6. Align the tabs in the bulb assembly with the
assembly in the trunk lid. Push the bulb assembly
back into place until it snaps in. You may need to
use a tool to guide the tabs into the assembly.
Taillamps and Turn Signal
Lamps (Coupe)
To replace this bulb:
1. Open the trunk.
2. Remove the trunk trim and pull back fastener.
6-52
3. Disconnect the wiring harness by lifting up on the
tab to release and pull it straight out.
4. Turn the bulb socket counterclockwise and pull it
straight out of the taillamp assembly.
5. Pull the old bulb straight out of the bulb socket.
6. Push the new bulb straight into the bulb socket
until it clicks.
7. Push the bulb socket into the taillamp assembly
and turn it clockwise to lock it into place.
8. Push the wiring harness straight into the bulb
socket and push down on the tab.
9. Reinstall the trunk trim and fastener.
I n f o r ma t i o n P r o v i d e d b y :