Starting The Programme; Child Lock; Progress Of Programme - Beko WMB 51232 PT Instruction Manual

start time moves up and down on the
display.
C
Additional laundry may be loaded
during the delayed start period.
5. At the end of the countdown, duration
of the selected programme will be
displayed. "_" symbol will disappear
and the selected programme will start.
Changing the Delayed Start period
If you want to change the time during
countdown:
1. Press Delayed Start button. Time will
increase by 1 hour each time you press
the button.
2. If you want to decrease the delayed
start time, press Delayed Start button
repeatedly until the desired delayed
start time appears on the display.
Canceling the Delayed Start function
If you want to cancel the delayed start
countdown and start the programme
immediately:
1. Set the Delayed Start period to zero or
turn the Programme Selection knob to
any programme. Thus, Delayed Start
function will be canceled. The End/
Cancel light flashes continuously.
2. Then, select the programme you want
to run again.
3. Press Start / Pause button to start the
programme.

Starting the programme

1. Press Start / Pause button to start the
programme.
2. Programme follow-up light showing the
startup of the programme will turn on.
C
If no programme is started or no key
is pressed within 1 minute during
programme selection process, the
machine will switch to Pause mode and
the illumination level of the temperature,
speed and loading door indicator lights
will decrease. Other indicator lights
and indicators will turn off. Once the
Programme Selection knob is rotated
or any button is pressed, indicator
lights and indicators will turn on again.

Child Lock

Use Child Lock function to prevent children
from tampering with the machine. Thus
you can avoid any changes in a running
programme.
C
If the Programme Selection knob
is turned when the Child Lock is
active, "Con" appears on the display.
The Child Lock does not allow any
change in the programmes and the
selected temperature, speed and
auxiliary functions.
C
Even if another programme is
selected with the Programme
Selection knob while the Child
Lock is active, previously selected
programme will continue running.
To activate the Child Lock:
Press and hold 1
Function buttons for 3 seconds.
The lights on the 1
Function buttons will flash, and "C03",
"C02", "C01" will appear on the display
respectively while you keep the buttons
pressed for 3 seconds. Then, "Con" will
appear on the display indicating that the
Child Lock is activated. If you press any
button or turn the Programme Selection
knob when the Child Lock is active, same
phrase will appear on the display. The
lights on the 1st and 2nd auxiliary function
buttons that are used to deactivate the
Child Lock will blink 3 times.
To deactivate the Child Lock:
Press and hold 1
function buttons for 3 seconds while any
programme is running. The lights on the
1 and 2 Auxiliary Function buttons
st nd
will flash, and "C03", "C02", "C01" will
appear on the display respectively while
you keep the buttons pressed for 3
seconds. Then, "COFF" will appear on
the display indicating that the Child Lock
is deactivated.
C
In addition to the method above, to
deactivate the Child Lock, switch the
Programme Selection knob to On
/ Off position when no programme
is running, and select another
programme.
C
Child Lock is not deactivated after
power failures or when the machine is
unplugged.

Progress of programme

Progress of a running programme
can be followed from the Programme
Follow-up indicator. At the beginning
of every programme step, the relevant
indicator light will turn on and light of the
completed step will turn off.
53
EN
and 2 Auxiliary
st nd
and 2 Auxiliary
st nd
and 2 auxiliary
st nd