Table of Contents
Advertisement
PnP/PCI Configurations
Reset Configuration Data (default: Disabled)
This option is used to set whether permits the system to automatically
distribute IRQ DMA and I/O address when the machine is turned on every
time. The setting values are Disabled and Enabled.
Resources Controlled By (default: Auto (ESCD))
This option is used to system set resource control style.
If all cards you used support PnP, it can select this option, BIOS
automatically distributes interruption resources.
If you install ISA card not supporting PnP, in the case that the system
occurs hardware conflict, it needs to select "Manual" and manually adjust
interruption resources. For this motherboard has no ISA slot, so it does
not consider this option.
IRQ Resources
Press the key "Enter", then the user can manually set IRQ resources.
PCI/VGA Palette Snoop (default: Disabled)
If you use non-standard VGA card, if graphic acceleration card or MPEG
audio card is not accurate in display of color, it can solve this problem
when this item is set. The setting values are Disabled and Enabled.
INT Pin 1-8 Assignment (default: Auto)
This option is used to distribute the interruption requirements of various
PCI equipment.
Chapter 3 BIOS Description
PnP/PCI Configurations Menu
875A02 User Manual
63
Advertisement
Table of Contents
