Foxconn 875A02 Manual page 57

First/Second/Third Boot Device (Default: Floppy/Hard Disk/LS120)
This option allows you to set the boot device sequence. The available setting
values are: Floppy, LS120, Hard Disk, CDROM, ZIP100, USB-FDD, USB-ZIP,
USB-CDROM, LAN, and Disabled.
Boot Other Device (Default: Enabled)
With this function set to Enabled, the system will boot from some other device
if the first/second/third starting devices failed.
Swap Floppy Drive (Default: Disabled)
If it is set to Enabled, the label of FDD A and B can be exchanged. The
available setting values are: Disabled and Enabled.
Boot Up Floppy Seek (Default: Enabled)
If it is set to Enabled, BIOS will activate the floppy drive during the system boot,
and the drive's indicator will flash after the activation.The magnetic head will
move back and forth from A to B. The available setting values are: Disabled
and Enabled.
Boot Up NumLock Status (Default: On)
This option is used to set up the NumLock status after the startup. When it is
set to On, the NumLock will be activated during system startup. When it is set
to Off, users can use the number keys instead of the arrow keys to move the
cursor. The available setting values are: On and Off.
Gate A20 Option (Default: Fast)
This option is used to set up the A20 signal control necessary for access to
the 1MB memory. The available setting values are: Normal and Fast.
Typematic Rate Setting (Default: Disabled)
When it is set to Enabled, the 2 subsequent options can be activated; when it
is set to Disabled, the 2 subsequent options will be closed.
Typematic Rate (Chars/Sec) (Default: 6)
Used to set the repeat rate for keyboard input of the same letter.
Typematic Delay (Msec) (Default: 250)
Used to set the repeat keyboard input rate when pressing a key continuously.
Chapter 3 BIOS Description
875A02 User Manual
49