Page 1
845GVME-S Easy Installation Guide Motherboard Layout JP3 USB Power Selec- tion Jumper JP4 USB Power Selec- tion Jumper CD_IN Audio Connector CPU Model Selection Jumper Front Audio Connector 12V ATX Power Connector COM2 Connector System FAN Connector PCI Expansion Slots...
Rear Panel SPP/EPP/ECP 10Mb/100Mb Parallel Port LAN Connector (Printer Port) L i n e - i n j a c k PS/2 Mouse Connector L i n e - o u t j a c k PS/2 Keyboard M i c r o p h o n e Connector j a c k USB 2.0 Port...
1. Clear CMOS Jumper: CLR_CMOS Clear This motherboard uses the CMOS RAM to store all C M O S the parameters. The CMOS can be cleared by reset- ting the CMOS jumper. You can refer to the following process. Normal Status 1.
Page 5
5. USB Power Selection Jumper: JP3, JP4, JP5 The motherboard uses JP3, JP4, JP5 jumper to select USB power. JP3 is for +5V_SYS +5V_SB USB, JP4 is for NIC_USB, JP5 is for Front (Default) J P 4 NIC_USB USB (FP_USB1). Pin 1 and 2 together (default) select +5V_SYS power, which doesn’t supports USB device wake up function.
Page 6
8. CD_IN Connector: CD_IN CD_R CD_IN is Sony standard CD audio connector, it can be connected to a CD-ROM drive through a CD audio CD_L cable. CD_IN 9. Front Audio Connector: F_AUDIO1 The audio interface provides two kinds of audio MIC_IN MIC_GND output choices: the Front Audio, the Rear Audio.
Page 7
11. COM2 Connector: FP_COM2 Empty This motherboard attached a serial connector for your computer, you only need connect it with cable, then link devices to cable port. RLSD SOUT FP_COM2 12. 6-channel Audio Effects The motherboard is equipped with the Realtek ALC655 chip, which provides sup- port for 6-channel audio output, including 2 front, 2 rear, 1 center and 1 subwoofer channel.
Page 8
Select this option and press <Enter>. 14. Foxconn Utility CD This motherboard comes with one Utility CD. To begin using the CD, simply insert the CD into your CD-ROM drive. The CD will automatically display the main menu screen.