Foxconn 875A02 Manual page 42

AGP Slot (Accelerated Graphic Port)
This motherboard has Accelerated Graphics Port (AGP) slot that only Supports
+1.5V AGP cards. When you use an AGP card, make sure that your AGP card with
+1.5V specification. Note the notches on the card Golden fingers to ensure that
they fit the AGP slot on your motherboard.
Installing an expansion card
1. Before installing the expansion card, read the documentation that came with
it and make the necessary hardware settings for the card.
2. Make sure to unplug the power cord before adding or removing expansion
cards.
3. Remove the bracket opposite the slot that you intend to use.
4. Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
5. Secure the card to the chassis with the screw you removed earlier.
Warning:
The motherboard may be damaged if a 3.3V AGP card is used.
Make sure that your AGP card is 1.5V specification. Note the
notches on the card golden fingers to ensure that they fit the AGP
slot on your motherboard.
34
Chapter 2 Installation Instructions
875A02 User Manual
AGP Slot