Related Manuals for Jensen JiPS-200i
Summary of Contents for Jensen JiPS-200i
- Page 1 DOCKING SPEAKER SYSTEM FOR iPad, iPhone and iPod USER MANUAL JiPS-200i (iPod/iPhone/iPad Not Included) PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR...
-
Page 2: Dear Jensen® Customer
The serial number of this product is found on its back cover. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss. Model Number: JiPS-200i Serial Number:... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. -
Page 4: Important Notes
Power Sources – The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. Do not overload wall outlet. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. -
Page 5: Protect Your Furniture
'feet' before you place the product on fine wooden furniture. PRODUCT FEATURES The JiPS-200i is an iPod/iPhone/iPad Docking Speaker System with incorporates the following features: Built-in Sliding Docking Station for iPod/iPhone/iPad. -
Page 6: Remote Control
REMOTE CONTROL Power ON / Standby Button Volume Down (-) Button Volume Up (+) Button Play/Pause Button iPod Repeat Button SKIP/Fast Backward Button SKIP/Fast Forward Button iPod Menu Button iPod Enter Button iPod Menu UP Button iPod Menu DOWN Button INSTALLATION CONNECTING THE AC POWER An AC-DC Adaptor with 5V DC 2500mA output (included) is required for operating the... -
Page 7: Battery Care
installed correctly. The remote will not work if the battery is installed with the wrong polarity. CAUTION: Danger of explosion if the battery is replaced incorrectly. Replace only with the same type battery. 3.) Insert the battery holder back into the battery slot. NOTE: Only use a well-known brand of cell battery to ensure the longest life and best performance. -
Page 8: Auxiliary Input
5.) Press the POWER ON/STANDBY button on the remote control to place the unit into standby mode after listening. You can also completely turn off the power to the unit by switching the Main POWER ON/OFF switch on the back of the unit to the OFF position. -
Page 9: Care And Maintenance
your external device then you may need to adjust both the volume control of your external device and the volume control of this system to find the most desirable volume setting. (2) Press the ON/Standby button on the remote control to place the system into standby mode when you finish listening. -
Page 10: Troubleshooting Guide
TROUBLESHOOTING GUIDE Symptom Possible Problem Solution AC Adaptor is not plugged into a wall outlet or the Plug the AC adaptor into a wall outlet connector is not and plug the connector into the supply plugged into the jack on the unit. The unit does not power supply jack on respond (no power). -
Page 11: Specifications
Volume level is set Decrease the volume. too high. If the iPod/iPhone/iPad original sound source is of poor quality, distortion and noise are easily noticed with Sound is distorted. Sound source is high-power speakers. distorted. If you are using an external sound source like older generation of iPod, try reducing the output volume on the device itself..