Table of Contents
Advertisement
6.
Press
. See
7.
The settings will be saved when selecting.
Using Wall Color
In the situation where you are projecting onto a colored surface such as a painted wall
which may not be white, the Wall Color feature can help correct the projected
picture's color to prevent possible color difference between the source and projected
pictures.
To use this function, go to the DISPLAY > Wall Color menu and press
select a color which is the closest to the color of the projection surface. There are
several precalibrated colors to choose from: Light Yellow, Pink, Light Green, Blue, and
Blackboard.
Fine-tuning the image quality in user modes
According to the detected signal type, there are some user-definable functions
available when User 1 or User 2 mode is selected. Based on your needs, you can
make adjustments to these functions by selecting them and pressing
projector or remote control.
Adjusting Brightness
The higher the value, the brighter the image. And
the lower the setting, the darker the image. Adjust
this control so the black areas of the image appear
just as black and that detail in the dark areas is
visible.
Adjusting Contrast
The higher the value, the greater the contrast. Use
this to set the peak white level after you have
previously adjusted the Brightness setting to suit
your selected input and viewing environment.
You can also adjust Brightness or Contrast by using
BRIGHT or CONTRAST key on the remote control.
Adjusting Color
Lower setting produces less saturated colors. If the setting is
too high, colors on the image will be overpowering, which
makes the image unrealistic.
Adjusting Tint
The higher the value, the more reddish the picture becomes. The lower the value, the
more greenish the picture becomes.
Adjusting Sharpness
The higher the value, the sharper the picture becomes. The lower the value, the
softer the picture becomes.
Adjusting Brilliant Color
This feature utilizes a new color-processing algorithm and system level enhancements
to enable higher brightness while providing truer, more vibrant colors in picture. It
enables a greater than 50% brightness increase in mid-tone images, which are
Operation
34
to select a sub-menu item to be changed and adjust the value with
"Fine-tuning the image quality in user modes"
below for details.
/
/
on the
+50
+50
+30
+30
0
-30
/
to
+70
+70
+30
Advertisement
Table of Contents
