Anti-Alias Optical Filter Assembly; Removal; Removing Anti-Alias Optical Filter - Polaroid Digital Microscope Camera Repair Manual

Hide thumbs Also See for Digital Microscope Camera:

Table of Contents

DMC Repair Manual

Anti-Alias Optical Filter Assembly (Figure 2-7)

1. Remove the bottom extrusion.

2. Remove the front panel and optics assembly.

3. Place the front panel and the optics assembly onto an anti-static mat.

4. Remove the three (3) screws securing the optics assembly to its front panel supports.

5. Remove the CCD retainer and the backing pad.

6. Lift off the CCD imager from the optical mount being careful not to scratch the CCD imager.

7. Remove the optical mount and shutter asssembly from the front panel and place it into the

optical mount fixture.

Note: Make sure that the optical mount is inserted into the optical mount fixture with the

thread side facing up and the motor on the shutter facing down.

Optics

Assembly

Figure 2-7. Removing anti-alias optical filter assembly

Spanner Nut

Anti-Alias

OpticalFilter

Optical Filter Assembly

Parts Replacement

Optical Mount

Table of Contents