Icon/Connector; Test Software; Tester Operation; Starting The Tester - Polaroid Digital Microscope Camera Repair Manual

Hide thumbs Also See for Digital Microscope Camera:
Table of Contents

Advertisement

DMC Repair Manual
analysis VI's, Sub VI components which call other VI's, and network and file I/O functions
that store or retrieve data in ASCII, binary, or spreadsheet formats.

Icon/Connector

The icon/connector is the calling interface. The icon is the graphical ID of the VI, and the
connector assigns controls and indicators to VI input and output terminals.

Test Software

The Test Software is an application program that was developed using LabView software
(National Instrument) and Concept VI Image Processing Library (Graftek). It is intended to help
the repair person diagnose DMC malfunctions. Programs developed using LabView are called
virtual instruments (VI's).
The developed software consists of a Tester which invokes the necessary sub-VI's routines that
allow the repair person to check the DMC.
When the Tester is invoked, it performs and verifies specified camera tests.
At the completion of the specified test, a report file is generated by the Tester indicating
whether or not the tested functions passed (
parameters for the test functions so that repair person can verify the tested functions with the
DMC's specifications.
If the report file indicates that all or a particular function failed (
compare the current parameters with the DMC's specifications to determine how to bring the
failed function/functions back into specification.

Tester Operation

Starting the Tester

1. If applicable, click the mouse on the front panel white arrow to start the tester.
2. Click the mouse on the Start button to start the test sequence.
3. Tester prompts the user to perform specified function when testing the DMC.
4. Once all user prompts are completed, the test sequence for the DMC begins.
5. Upon completion of all or partial tests, a test completed message appears in the Status box
of the test panel. Also, a test report and the
panel are updated.
Pass
) or failed (
Fail
Fail
Pass
/
Fail
indicators displayed on the test
41
Testing & Adjustment
). It also list the current
), the repair person can

Advertisement

Table of Contents
loading

Table of Contents