Assigning Model 3102 Access Button Functions Using The Tui; Default Model 3102 Button Assignments - 3Com VCX Manual

Assigning Model
3102 Access Button
Functions Using the
TUI
Default Model 3102
Button Assignments

Assigning Model 3102 Access Button Functions Using the TUI

This section describes how to use the Telephone User Interface (TUI) to
view, and possibly modify, the VCX features associated with the Access
buttons on your telephone. You can also use the VCX User Interface to
view and modify button mappings (see
Functions Using the VCX User
When a VCX system is configured, your administrator assigns (maps)
default functions for the Access buttons on your telephone. Mapping a
function to a button allows one-touch access to that function. Speed
dialing is one example of a one-touch function.
Your administrator may allow you to reprogram a button's function (for
example, create more personal speed dial buttons). Consequently, a
programmable button is one of the following states:
Locked — Button function can be changed only by the administrator.
■
However, if the button function requires additional information (for
example, a speed dial number or a call forward destination number),
you can choose the values for the parameters. There are two
exceptions:
BLF (Busy Lamp Field) — Displays the status of another user's
■
telephone. When you press the button associated with the BLF
status light, the BLF function calls the other user's telephone.
System Speed Dial — Dials an administrator-configured speed dial
■
number.
The additional information for these two functions is set by the
administrator and you cannot change the values if the buttons are
in the locked state.
Unlocked — Button function and any associated values can be
■
completely reconfigured by you or the administrator.
Note that, if a button function requires additional information (for
example, a call forward destination number) and you or your
administrator have not configured this information, the system will
prompt you for it when you press the button.
As noted in Access Buttons, the 18 programmable Access buttons for the
Model 3102 telephone are located in two columns on the right side of
the telephone.
Assigning Access Button
Interface).
21