If Necessary To Use Pulse Dialing - Canon ImageClass MF4270 Starter Manual

7
Set the handset cable (A) in the clamps, and close the
clamps.
If using the optional handset or an external telephone,
make sure to set the receive mode to <FaxTel> or
<MANUAL>. For how to set the receive mode, see "Set the
Receive Mode, " on p. 18.

If Necessary to Use Pulse Dialing

By default, telephone line type on the machine is set to tone dialing. When you use tone dialing, skip
the following procedure.
When you use pulse dialing, follow the procedure below and change the telephone line type setting to
<ROTARY PULSE> on the machine.
If you do not know the type of telephone line you use, contact your local telephone company.
1
Press [Additional Functions].
2
Press [ ] or [
3
Press [ ] or [
4
Press [ ] or [
5
Press [ ] or [
<TOUCH TONE>: Tone dialing (Default)
<ROTARY PULSE>: Pulse dialing
6
Press [Stop/Reset] to return to the standby mode.
] to select <6 FAX SETTINGS>, then press [OK].
] to select <2 USER SETTINGS>, then press [OK].
] to select <4 TEL LINE TYPE>, then press [OK].
] to select the telephone type, then press [OK].
Before FAX Setting
15