Set The Date And Time - Canon ImageClass MF4270 Starter Manual

Set Up the Machine

Set the Date and Time

Before using the machine, you MUST set the current date and time. The current date and time settings are
used as standard timer settings for functions that require them.
Entering Information
●
Numeric keys: Enters numbers.
‒
[ ] or [ ]: Moves the cursor position.
‒
[OK]: Confirms the entry.
‒
1
Press [Additional Functions].
2
Press [ ] or [
SETTINGS>, then press [OK].
3
Press [ ] or [
SETTING>, then press [OK].
4
Use the numeric keys to enter the time (in 24-
hour/military time format) and date (day/
month/year), then press [OK].
Ex.
D A T E & T I M E S E T T I N G
1 5 : 5 0 3 1
If you accidentally enter an incorrect number, press [
or [ ] to move the cursor to the number that needs
correcting and overwrite it.
12
] to select <9 TIMER
] to select <1 DATE&TIME
1 2 ´ 0 7
]
5
Press [Stop/Reset] to return to the standby
mode.
–
You can select one of the following three date formats
in <2 DATE TYPE SELECT>.
–
<DD/MM YYYY>
–
<YYYY MM/DD>
–
<MM/DD/YYYY>
–
By default, <4 DAYLIGHT SV.TIME> in the <9 TIMER
SETTINGS> menu is set to <ON>.
–
If you want to set <4 DAYLIGHT SV.TIME> in the <9
TIMER SETTINGS> menu to <OFF>, see Chapter 1,
"Before Using the Machine, " in the Reference Guide.
The LCD display turned off:
●
The machine may enter the sleep mode while you are
setting up the machine. Press
the machine back on and continue the setup.
[Energy Saver] to turn