Table of Contents
Advertisement
5. Fax
activation is turned ON beforehand (feature
#41 on page 65). The default setting is ON.
To stop receiving
Press {STOP}.
5.8.2 Activating TEL/FAX mode
1
Make sure feature #73 is set to "TEL/FAX"
beforehand (page 66).
2
Press {AUTO ANSWER} repeatedly to
display the following.
L The {AUTO ANSWER} indicator on the
base unit turns OFF and u disappears
from the cordless handset display.
3
The ringer volume setting should be ON
(page 19).
How phone calls and faxes are received
1. "INCOMING CALL" will be displayed but the
unit will not ring.
2. The unit will wait for the duration of 2 rings
before answering the call.
L The number of rings is determined by the
"TEL/FAX delayed ring setting" (feature
#78 on page 67).
L During this time, an extension telephone
(if connected to the same line) will ring.
3. The unit will answer the call and try to detect
a fax calling tone.
When a fax calling tone is detected
The unit receives the fax automatically
without ringing.
When a fax calling tone is not detected
A The unit will ring. You may answer the call.
L Callers will hear a ring back tone different
from the one generated by the telephone
company.
L An extension telephone (if connected to
the same line) will not ring at this time. To
answer the call with the extension
telephone, lift the handset and press
{*}{0} (default auto disconnection code)
while the fax machine is ringing.
B If you do not answer the call, the unit will
activate the fax function.
L Some fax machines do not generate fax
calling tones when sending faxes,
therefore the unit will try to receive a fax
even if no fax calling tone is detected.
48
TEL/FAX MODE
Note:
L Even if you press the auto disconnection
code, the fax machine will activate the fax
function:
– If the extension telephone is connected to
[EXT],
– Depending on the type of extension
telephone,
press {STOP} on the fax machine to talk with
the calling party.
Advertisement
Table of Contents
