Table of Contents
Advertisement
7. Select "Save", then press {>}.
8. Press {ih}.
Voice enhancer
You can change the tone quality of the receiver
while you are on a call. 3 settings are available.
1. Press {j/OK} during a call.
2. Select "Voice Enhancer", then press {>}.
3. Select the desired setting, then press {>}.
Note:
L If you select "High Tone" or "Low Tone",
"[VE]" is displayed.
Mute
You can mute your voice during a conversation.
While mute is turned ON, you will be able to hear
the other party, but the other party will not be
able to hear you.
1. To mute your voice, press {C/T}.
2. To return to the conversation, press {C/T}
again.
Key lock
The cordless handset can be locked so that no
calls or settings can be made. Incoming calls can
be answered, but all other functions are disabled
while key lock is ON. Emergency calls (page 75)
cannot be made until key lock is turned OFF.
To turn key lock ON, press {j/OK} for about 2
seconds.
L "[X]" is displayed.
To turn key lock OFF, press {j/OK} for about
2 seconds.
Note:
L Key lock is turned OFF when the cordless
handset is turned OFF.
4.1.2 With the base unit
{MIC}
1
Lift the handset or press {SP-PHONE}.
2
Dial the telephone number.
{REDIAL/PAUSE}
{A}{B}
{MUTE}
{SP-PHONE}
3
When finished talking, replace the handset
or press {SP-PHONE}.
Speakerphone operation
L For best performance, please note the
following:
– Talk into {MIC} (microphone).
– Use the speakerphone in a quiet
environment.
– Speak alternately with the caller.
– If you or the other party have difficulty
hearing each other, press {A} or {B}
repeatedly to adjust the speaker volume
as necessary.
L While talking using the handset, you can
switch to a speakerphone conversation by
pressing {SP-PHONE}, then replace the
handset. To switch back, lift the handset.
To redial the last number dialled from the
base unit
Press {SP-PHONE}, then press
{REDIAL/PAUSE}.
To redial automatically
Press {SP-PHONE}, then press
{REDIAL/PAUSE}.
L If the line is busy, the unit will automatically
redial the number up to 10 times. While the
base unit is redialling, mute is automatically
turned ON.
Note:
L If mute does not turn OFF after the line is
connected, press {MUTE}.
Mute
You can mute your voice during a conversation.
While mute is turned ON, you will be able to hear
the other party, but the other party will not be
able to hear you.
1. To mute your voice, press {MUTE}.
2. To return to the conversation, press {MUTE}
again.
4. Telephone
25
Advertisement
Table of Contents
