Samsung SCH-u340 series User Manual page 77

Press
5.
• Lock Now: Your phone returns to standby mode. The Lock Code is required
immediately to access any functions.
• Unlock: If locked, unlocks the device or phone, depending on your selection.
• On Power Up: The Lock Code is required whenever you power up the phone.
Use the navigation key to select an option and press
6.
Edit Lock Code
The default lock code is the last four digits of your phone number. Edit Code allows
you to change this code to a lock code of your preference.
Press
1.
press .
Press
2.
def
display.
Press
3.
def
lock code is the last four digits of your telephone number.
Enter Lock Code.
4.
Press
5.
abc
At the " ENTER NEW LOCK CODE " prompt, enter the new device lock code.
6.
At the "CONFIRM LOCK CODE " prompt, re-enter the new device lock code
7.
to confirm that your lock code has been changed.
Note: Your phone does not allow you to view the lock code for obvious security reasons. If you change the
lock code, be sure to write down or memorize the new code.
Resetting Your Phone
Reset Phone returns all setup options to their factory default.
Press
1.
press .
Press
2.
def
display.
Press
3.
def
lock code is the last four digits of your telephone number.
Enter Lock Code.
4.
Press
5.
def
The "SETTINGS WILL BE SET TO DEFAULT EXCEPT CONTACTS. RESET
6.
PHONE?" pop-up appears in the display.
Lock Mode. The following options appear in the display:
MENU, use the navigation key to highlight
Phone Settings. The Phone Settings menus are listed in the
Security. You're prompted to enter the lock code. The default
Edit Code.
MENU, use the navigation key to highlight
Phone Settings. The Phone Settings menus are listed in the
Security. You're prompted to enter the lock code. The default
Reset Phone.
Section 8: Changing Your Settings
.
Settings and
Settings and
74