Table of Contents
Advertisement
3.3.3.4 Reset and Rename Local Device
Occasionally you may encounter problems with the network or the computer, causing the
presentation group to malfunction on your B360. One way to resolve this problem is to reset
the presentation group.
Option
Copyright © 2013 DELTA Electronics, Inc. All rights reserved.
respectively.
To Disconnect from a Presentation Group:
Touch the
tab to enter the presentation control page.
Touch the
If the host exited the presentation session without handing
over the host role, all participants will receive a message
prompting them to take over the host role. The first to respond
to the prompt will assume the role of the host.
Description
To perform a Reset:
First touch the
tab and touch the
Device Reset.
Resetting:
Tap Quick Reset to start a presentation group over again.
Tap the Full Reset button to reset the NovoConnect B360
device. The B360 device will restart automatically.
Conflicts may occur when multiple participants
simultaneously attempt to reset the presentation group or
the B360. The reset privilege priorities are as the following:
1. Host: The host has the sole privilege to quick-reset the
presentation group or the B360 device when the host stays
connected to the B360.
2. Presenter: If the host loses connection with the B360, the
current presenter inherits the privilege to quick-reset the
B360.
3. Participant: If the host and the presenter both lose
connection with the B360, any participant can quick-reset
the presentation group.
button to exit the presentation group.
arrow of
Page 61
Advertisement
Table of Contents
