Table of Contents
Advertisement
3.3.1.2 Connect to your B360 device manually
If you need to configure login information manually before connecting to your B360, this is the
preferred connection option. After launching the NovoPresenter app, touch the
seen in the screenshot below) and access the configuration options.
Copyright © 2013 DELTA Electronics, Inc. All rights reserved.
QR Code
Confirm Connection:
After your NovoPresenter App on your Android tablet is
connected successfully to your B360, You will see the
connection tab light up blue
If you are the first participant, you will see that your Android
tablet's on-screen display is wirelessly mirrored on your
projector or TV. You can slide the PIN requirement switch to
OFF or ON to disable or enable usage of PIN code.
View Participants List:
You can touch the
Example: There are a total of six participants in the
presentation group. Jennifer the host herself is not making a
presentation at the moment. She has assigned Kevin, Amber,
John, and Katy as the four presenters.
Allow other users to connect to the B360 automatically via
QR Code:
For the first participant, NovoPresenter automatically
generates a QR code on your Android device's home directory
(which is mirrored on your projector or TV) to allow other
subsequent users to connect to your B360 automatically.
Subsequent users can follow the steps described above to
scan the QR code and connect automatically to your B360.
Upon starting the NovoPresenter, you should be able to find
an applicable QR Code image being displayed. If not, just
touch the
or the
the lower left corner of the NovoPresenter screen.
.
tab to see the current participant list.
tab followed by the
tab on
tab (as
Page 45
Advertisement
Table of Contents
