Table of Contents
Advertisement
2.2 Client Mode
In this mode, the B360 device functions as a WiFi client and a WiFi AP is needed for network
connectivity. A mouse is required for the following steps.
On the home screen of the NovoConnect, first select WiFi->Normal Mode-> Config->Wireless &
Networks-> Wi-Fi (ON), and then select the desired WiFi AP SSID. Enter password if prompted.
For a PC to connect to the Wi-Fi AP, click the network icon
or
Select the desired
.
WiFi AP SSID. Enter password if prompted.
For a Mac to connect to the Wi-Fi AP, click the network icon
Select the desired WiFi AP
.
SSID and click Join. Enter password if prompted.
For a tablet to connect to the Wi-Fi AP, enable WiFi and go to the WiFi AP list. Select the desired
WiFi AP SSID. Enter password if prompted.
Copyright © 2013 DELTA Electronics, Inc. All rights reserved.
Page 11
Advertisement
Table of Contents
