Table of Contents
Advertisement
3.2.1.1 Connect to your B360 device automatically via QR Code
This is the default B360 connection option which allows you to connect to your B360
automatically without any manual configurations. After launching the NovoPresenter app,
touch the
tab (as seen in the screen shot below) and access the connection options.
(Note: Education Edition does not have the screen preview control tab
Option
QR Code Scan Area
Copyright © 2013 DELTA Electronics, Inc. All rights reserved.
Description
Connect to the B360 automatically via QR Code:
The QR Code / Manual Inputs switch will be in the QR Code
position by default (if not, just tap the switch once).
Aim your tablet's camera to the QR code containing login
information, which can be found on your B360 home screen
or on the screen of the device connected to your B360. Under
normal circumstances, NovoPresenter will automatically login
to your B360.
Should automatic login fail, then follow the manual
configuration option in the section
B360 device
manually.
or the
symbol.)
3.2.1.2 Connect to your
Page 21
Advertisement
Table of Contents
