Table of Contents
Advertisement
1.2.2 The NovoConnect Home Screen
The NovoConnect B360 device will power up with the below display after steps 1 and 2 listed
above. This display is referred to as the "NovoConnect home screen" or just the "home screen"
in the document. The display is generated by the presentation management software, in the
B360 device, which is also known as the remote viewer.
4
1
1
Presentation Setup
Enable Wi-Fi on the computer. Search for and connect to the SSID shown in this step (e.g.
NVC_39FC7). The default Wi-Fi mode is Hotspot Mode for your B360.
2
Software Installation
Windows/Mac Users:
iPad/Android Users:
3
Connect
Windows/Mac Users:
iPad/Android Devices:
4
Select the Application Edition (optional)
Connect a USB mouse to your B360. Click the on-screen edition display area to set your
NovoConnect to either Enterprise Edition or Education Edition.
Copyright © 2013 DELTA Electronics, Inc. All rights reserved.
2
Enter the URL into a web browser and follow the instructions in
the next section.
Follow the instructions in the next section.
Launch the installed NovoConnect Desktop Streamer application
and enter the URL (and PIN if required) shown in this step.
Scan the QR code on the bottom right corner of the NovoConnect
screen or manually configure the SSID into your tablet and enter
the IP address into your NovoPresenter and connect.
3
3
Page 6
Advertisement
Table of Contents
