Table of Contents
Advertisement
3.1.2 Step 2: Connect to your B360 device
Once you are done configuring your NovoConnect Desktop Streamer, you are ready to start or
join a presentation group with your B360.
(Note: Education Edition does not have the screen preview control tab
Option
Please note that your PC screen resolutions may be changed to match projector resolution, and
when disconnected from the NovoConnect device, the original screen resolution will be
restored. This takes place for all PCs in the same presentation group.
Copyright © 2013 DELTA Electronics, Inc. All rights reserved.
About:
Software version number of your NovoConnect Desktop
Streamer.
Save and Cancel buttons: You can save your configuration for
future presentation setup.
Description
Connect to your B360 device.
Click the
button. If you are the first participant, this
will start a presentation group on your B360. If you are not the
first participant, you will be joining a presentation group.
After your Desktop Streamer is connected successfully to your
B360, you will see the connection tab light up
If you are the first participant, you will see that your PC's
on-screen display is wirelessly mirrored on your projector or
TV. You can also slide the PIN requirement switch to OFF or
ON to enable the use of access PIN code to the presentation
group.
If you are the first participant you may allow other users to
join the presentation group via QR code by clicking
to display the QR code and session information
windows for others to quickly connect to your B360.
or the
symbol.)
.
Page 14
Advertisement
Table of Contents
