Table of Contents
Advertisement
Video Quality
The video quality for all the cameras can be adjusted in the MAIN menu.
1. In the MAIN menu scroll down to VIDEO QUALITY.
2. Push the SELECT button to scroll between LOW, NORMAL,
HIGH and HIGHEST.
3.Push the MAIN menu button once you have selected the quality
level to update the changes.
Record Schedule
Record Schedule allows you to set the DVR to record between specified times or set to record when motion is detected.
The timeline in the Record Schedule screen shows 24 bars representing 24 hours in a day.
1. Use the LEFT and RIGHT buttons (on the remote) or the RWD
(for left) & FWD (for right) buttons to select the hour you would
like to change the settings on.
2. Push the SELECT button to scroll between each bar (hour).
NO RECORD - white bar
NORMAL RECORD - red bar
SENSOR RECORD - white bar with red"S"
3. To exit the Record Schedule screen push the MENU button.
Sensor Setup
Sensored Record Time
The DVR can be set to continue recording after it has detected motion.
1. Use the UP & DOWN buttons to scroll between each option. Push the
SELECT button to choose between 5, 10, 15, 20, 25 & 30 seconds.
Alarm Time
This is the time the alarm continues to beep after the DVR has detected
motion.
1. With the ALARM TIME option selected push the SELECT button to
choose between 5, 10, 15, 20, 25, 30 seconds, CONTINUOUS (CONT)
& OFF.
Motion Detector Setup
This section allows you to set up motion detection for each camera.
See instructions on MOTION DETECTOR SETUP for setting up the motion detector area.
S
Advertisement
Table of Contents
