System Battery; Replacing The System Battery - Dell PowerEdge C6320 Owner's Manual

seated in the socket, the ejectors on the memory module socket align with the ejectors on other
identical sockets that have memory modules installed.
Figure 58. Installing a memory module
1. memory module
3. memory module socket ejector (2)
5. Replace the air baffle.
6. Replace the system-board assembly.
7. Press <F2> to enter System Setup, and check the System Memory setting.
The system should have changed the value to reflect the installed memory.
8. If the value is incorrect, one or more of the memory modules may not be installed properly. Ensure
that the memory modules are firmly seated in the sockets.
9. Run the system memory test in the system diagnostics.
Related Information
Installing the air baffle
Installing a system-board assembly

System battery

Replacing the system battery

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
2. alignment key
89