System Board; Removing A System Board - Dell PowerEdge C6320 Owner's Manual

System board

Removing a system board

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Remove the system-board assembly.
2. Remove the air baffle.
3. Remove the expansion-card assembly.
4. Remove the heat sinks.
5. Remove the memory modules.
6. If installed, remove the SAS mezzanine card, 1GbE mezzanine card, or 10GbE mezzanine card.
7. Disconnect all the cables from the system board.
8. Remove the eight screws and then slide the system board.
CAUTION: Do not lift the system board by grasping a memory module, processor, or other
components.
9. Grasp the system board by the edges and lift the system board away from the system-board
assembly.
Figure 60. Removing and installing the system board
1. screw (8)
3. system-board assembly
Related Information
Removing a system-board assembly
Removing the air baffle
Removing the expansion card for 1U node
2. system board
91