Figure 48. Cable routing down for LSI 2008 SAS mezzanine card (1U node)
Removing the 1GbE mezzanine card
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: The 1GbE mezzanine card is seated in PCI-E Gen3 x8 mezzanine slot 3 on the system board,
which is not active in a one-processor configuration. See
1.
Remove the system-board assembly.
2.
Disconnect all the cables from the 1GbE mezzanine card.
3.
Remove the screws that secure the expansion-card bracket.
4.
Lift the expansion-card bracket out of the system-board assembly.
C6320 system board
connectors.
79