Installing A System-Board Assembly; Air Baffle; Removing The Air Baffle - Dell PowerEdge C6320 Owner's Manual

Installing a system-board assembly

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Slide the system-board assembly into the chassis until it snaps into place.
2. Reconnect all the external cables to the system board.
3. Replace the screw that secures the retaining latch.
4. Turn on the system board by pressing the power button on the back panel, and the attached
peripherals.
NOTE: Contact technical support to add the service tag of the system board to match the
service tag of the physical node.

Air baffle

Removing the air baffle

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Remove the system-board assembly.
2. Press the four latches along the direction of the arrows, and then lift the air baffle out of the system-
board assembly.
65