Utility-T1 Signaling Bit Monitor (Kx-Tda100/Kx-Tda200/Kx-Tda600 Only) - Panasonic KX-TDA200 Programming Manual

Item
Sub Code
Error Message
To view the error log
•
From the Utility menu, select Error Log.
2.6.9 Utility—T1 Signaling Bit Monitor (KX-TDA100/KX-TDA200/
KX-TDA600 only)
Displays reference signaling bit information for all channels of the T1 card, by monitoring sent and received A,
B, C and D bits. This utility is intended for use by dealers.
This option is only available at Installer level, and requires that the target T1 card be set to INS status.
While monitoring is being performed, any displayed bits whose value changes from 0 to 1 or vice versa will be
highlighted in red until the next screen refresh is performed.
To view signaling bit information
1.
From the Utility menu, select T1 Signaling Bit Monitor.
2.
From the Slot No drop-down list, select the target slot.
3.
From the Interval Timer drop-down list, select the number of seconds between each automatic screen
refresh.
4.
Click Start.
Monitoring will be performed and the screen will refresh according to the interval specified.
5.
Click Stop to end monitoring.
To refresh the screen at any time while monitoring is stopped, click Refresh.
Document Version 2008-11
2.6.9 Utility—T1 Signaling Bit Monitor (KX-TDA100/KX-TDA200/KX-TDA600 only)
Description
The 5-digit sub code of the relevant hardware. (XYYZZ)
•
X: Shelf number
KX-TDA50/KX-TDA100/KX-TDA200: 1
KX-TDA600:
•
1: Basic Shelf
•
2: Expansion Shelf 1
•
3: Expansion Shelf 2
•
4: Expansion Shelf 3
•
YY: Slot number
KX-TDA50: 00 to 11 (00: MPR slot; 01: Fixed slot, 02 to 04: Free
slot type A, 05 to 07: Free slot type B, 08 to 11: Option slot)
KX-TDA100: 00 to 06 (00: MPR slot; 01 to 06: Free slot)
KX-TDA200: 00 to 11 (00: MPR slot; 01 to 11: Free slot)
KX-TDA600:
•
Basic Shelf: 00 to 10
(00: EMPR Card Slot; 01 to 10: Free Slots)
•
Expansion Shelf: 01 to 12
(01 to 11: Free Slots; 12: BUS-S Card Slot)
•
ZZ: Physical port number (01 to 16)
For OPB3 card, sub slot number (1 to 3) + port number (1 to 4) will
be displayed as follows:
•
Sub slot 1 of OPB3: 11 to 14
•
Sub slot 2 of OPB3: 21 to 24
•
Sub slot 3 of OPB3: 31 to 34
A description of the error.
PC Programming Manual 51