Panasonic KX-TDA200 Programming Manual page 409

Value Range
For KX-TDA50/KX-TDA100/KX-TDA200:
1-8
For KX-TDA600:
1-32
Maintenance Console Location
5.12 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
4.3 [2-2] Operator & BGM
4.5 [2-4] Week Table
8.6 [6-6] Tenant—
Feature Manual References
11.1.4 Music on Hold
17.1.3 Tenant Service
COS
Specifies the COS of the incoming call distribution group. Depending on the COS, calls from certain extensions
are restricted as determined by the Internal Call Block feature. Also, when calls are forwarded or overflowed
to a CO line, the TRS assigned for the COS of the incoming call distribution group applies.
Default
1
Value Range
1–64
Maintenance Console Location
5.12 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
4.11 [2-7-1] Class of Service—COS Settings
4.12 [2-7-2] Class of Service—External Call Block
4.13 [2-7-3] Class of Service—Internal Call Block
Feature Manual References
9.1.14 Internal Call Block
CLIP on G-DN Button (KX-TDA100/KX-TDA200/KX-TDA600 only)
Specifies the CLIP number sent to the network when making calls using the ICD Group button.
Document Version 2008-11
Music On Hold
5.12 [3-5-1] Incoming Call Distribution Group—Group Settings
PC Programming Manual 409