Tables assigned to the trunk group. The modified number will then be recorded, and it is used for sending to
the network as a CLIP number.
A maximum of 4 CLIP Modification Tables can be programmed. Select the desired table from the Modification
Table list.
Removed Number of Digits
Specifies the number of leading digits to be removed from the incoming caller's number for each type of network
numbering plan.
Default
International: 0
National: 0
Subscriber: 0
Value Range
0–9
Maintenance Console Location
5.3 [3-1-3] Caller ID Modification
Programming Manual References
3.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—
number—Type of Number—Public, Private
3.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—
number—Type of Number—Public, Private
Feature Manual References
3.1.1 Caller ID
Added Number
Specifies the number to be added to the incoming caller's number in the place of the removed digits for each
type of network numbering plan.
Default
International: 011
National: 1
Subscriber: Not stored.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
5.3 [3-1-3] Caller ID Modification
Document Version 2008-11
5.3 [3-1-3] Caller ID Modification
Calling Party
Called Party
PC Programming Manual
389