Pc Programming; Installing And Starting The Maintenance Console - Panasonic KX-TDA200 Programming Manual

1.2.1 Installing and Starting the Maintenance Console

1.2 PC Programming

1.2.1 Installing and Starting the Maintenance Console
System programming, diagnosis and administration can be performed with a PC using the Maintenance
Console.
This section briefly describes how to install and start the Maintenance Console when the PC and the PBX are
connected by USB cable.
System Requirements
Required Operating System
•
Microsoft Windows
®
Minimum Hardware Requirements
•
HDD: 100 MB of available hard disk space
Recommended Display Settings
• Screen resolution: XGA (1024 ´ 768)
•
DPI setting: Normal size (96 DPI)
Installing the Maintenance Console
Note
•
To install or uninstall the software on a PC running Windows XP Professional, you must be logged in
as a user in either the "Administrators" or "Power Users" group.
•
To install or uninstall the software on a PC running Windows Vista Business, you must be logged in
as a user in the "Administrators" group.
•
To connect the PC to the PBX via USB, the KX-TDA USB driver must be installed. Follow the
instructions of the wizard to install the KX-TDA USB driver. When the PBX is first connected to the PC
via USB, you may be asked to select the appropriate USB driver. Browse for and select the KX-TDA
USB driver that was installed previously.
1.
Copy the setup file of the Maintenance Console to your PC.
2.
Double-click the setup file to run the installer.
3.
Follow the on-screen instructions provided by the installation wizard.
Starting the Maintenance Console and Assigning the Basic Items (Quick
Setup)
When you start the Maintenance Console with the Installer Level Programmer Code and connect to the PBX
for the first time after initialization (with the factory default setting), Quick Setup will launch automatically. During
Quick Setup, you will set up the following basic items:
•
Date and Time of the PBX. The date and time set to the PC's clock will be used.
•
System Password for installer for PC programming.
•
Operator and manager settings. Operator extensions for all time modes (day/lunch/break/night) can be
assigned.
•
Flexible Numbering plan to Type 1 or Type 2. If Type 1 (with
numbers (except access numbers) when an extension user wants to use a feature.
•
Operator call and Idle Line Access/ARS numbers.
•
Remote Maintenance Dial Number. Enter the complete telephone number of the PBX. When necessary,
this number will be used to access the PBX from a remote location for maintenance purposes.
12 PC Programming Manual
XP or Windows Vista Business operating system
® ®
) is selected, " " must prefix all feature
Document Version 2008-11