Tool-Call Pickup For My Group; Tool-Extension List View - Panasonic KX-TDA200 Programming Manual

2.5.6 Tool—Call Pickup for My Group
Allows you to automatically configure settings in 4.9 [2-6-2] Numbering Plan—Quick Dial and 6.4 [4-1-3]
Wired Extension—Speed Dial so that users can answer calls to their Call Pickup Group by pressing " 0".
To activate this tool
•
From the Tool menu, select Call Pickup for My Group.
The Group Call Pickup feature number (default:
is assigned to first personal speed dial.
Note
This tool can only be activated if all of the following conditions are met:
–
The first Quick Dial setting is empty or is already set to " 0".
–
" 0" is not used for another feature number.
–
The Group Call Pickup feature number has been assigned.
–
The Personal Speed Dialing feature number has been assigned.
2.5.7 Tool—Extension List View
Displays a list of all programmed extension numbers and types. It is possible to sort the information according
to Extension Number, Type, Extension Name, Shelf, Slot, or Port. There is also a key-word searching feature.
The types that can be displayed are as follows:
Type
Intercom
VM
Portable Station
ICDG
WG
VM (DPT)
VM (DTMF)
Pager
MODEM
OGM (DISA)
DSS
DPT-I/F CS
SVM
To view extension information
•
From the Tool menu, select Extension List View.
Document Version 2008-11
40) + the extension user group number of the extension
Detail
Wired Extension
Voice Mail
Wireless Extension (Portable Station)
Incoming Call Distribution Group
PS Ring Group
VM (DPT) Group
VM (DTMF) Group
External Pager
Analog Modem
DISA
DSS Console
PT-interface CS
SVM Card
2.5.7 Tool—Extension List View
PC Programming Manual 35