Panasonic KX-TDA200 Programming Manual page 289

Feature Manual References
3.1.13 CLIP (Calling Line Identification Presentation)
13.1.21 Private Network Features—QSIG—CLIP/COLP (Calling/Connected Line Identification Presentation)
and CNIP/CONP (Calling/Connected Name Identification Presentation)
Switch CLIP of CO Line / Extension (KX-TDA100/KX-TDA200/KX-TDA600 only)
Specifies the feature number used to send either the CLIP number of the CO line in use (subscriber's number)
or the extension to the network.
Default
*7*2
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.8 [2-6-1] Numbering Plan—Main
Programming Manual References
3.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—CO Setting—
Subscriber Number
6.1 [4-1-1] Wired Extension—Extension Settings—ISDN CLIP—
6.10 [4-2-1] Portable Station—Extension Settings—ISDN CLIP—
Feature Manual References
3.1.13 CLIP (Calling Line Identification Presentation)
MCID
Specifies the feature number used to ask the telephone company to trace a malicious call. This feature can
be used during a call or while hearing a reorder tone after the caller hangs up.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.8 [2-6-1] Numbering Plan—Main
Programming Manual References
None
Document Version 2008-11
4.8 [2-6-1] Numbering Plan—Main
CLIP ID
CLIP ID
PC Programming Manual 289