Message
Description
Action
Message
Description
Action
T
Message
Description
Action
Message
Description
Action
Message
Description
Action
Switch Binding was removed from attached devices that are also
participating in Port Binding. Please review the Port Binding
Configuration.
The device WWNs were removed from the Switch Membership List
(SANtegrity Switch Binding feature), but you should note that one or
more of these devices still has security control in port binding.
Verify that the security level for each device is as required by
reviewing the Bound WWN list in the Configure Ports dialog box.
System diagnostics cannot run. The Operational Status is invalid.
System diagnostics cannot run on switches with failed ports.
Replace failed ports.
The add firmware process has been aborted.
User has ended the add firmware process.
N/A. An informational message.
The data collection process failed.
An error occurred in the data collection process.
Contact support personnel.
The data collection process has been aborted.
User has ended the data collection process.
N/A. An informational message.
Product Manager Messages
Product Manager Messages
A
A-23