Efc Management Menu Options; Efc Manager - McDATA Sphereon 4500 User Manual

EFC Management Menu Options

EFC Manager

View Tabs
Product Menu
The default user name for the right to view status and other information
is "operator." The default user name for the right to modify
configuration data, perform maintenance tasks, or perform other options
is "administrator." The default password for both user names is
"password."
• Management using simple network management protocol
(SNMP). An SNMP agent is implemented through the Product
Manager application that allows administrators on SNMP
management workstations to access product management
information using any standard network management tool.
Administrators can assign Internet Protocol (IP) addresses and
corresponding community names for up to six workstations
functioning as SNMP trap message recipients. Refer to the
McDATA OPENconnectors SNMP Support Manual (620-000131) for
more information.
This manual provides details on the Product Manager application for
the Sphereon ES-4500 Fabric Switch only. Also use this manual if you
have EFCM Lite installed on a customer-supplied server platform
(except for those features listed in the preceding paragraphs that are
not supported by this option). This manual does not cover the
SANpilot Interface.
This user's guide provides information on the McDATA Sphereon
ES-4500 Product Manager application only. Information on the EFC
Manager application is provided in the McDATA Enterprise Fabric
Connectivity Manager User Manual (620-005001). Following are lists of
options available under the menu bar in all applications. References
are provided to the correct publication for detailed information on
these options.
Following are options available through the EFC Manager. For more
information, refer to Chapter 3 of the McDATA Enterprise Fabric
Connectivity Manager User Manual (620-005001).
• Products
• Fabrics
• New
Product Manager Overview

EFC Management Menu Options

1
1-3