McDATA Sphereon 4500 User Manual page 163

C
Message
Description
Action
Message
Description
Action
Message
Description
Action
Message
Description
Action
Message
Description
Cannot disable Switch Binding while Enterprise Fabric Mode is
active and the switch is Online.
User attempted to disable switch binding through the Switch Binding
Change State dialog box, but Enterprise Fabric Mode is enabled.
You must either disable Enterprise Fabric Mode using the Enterprise
Fabric Mode dialog box in the EFC Manager application or set the
switch offline before you can disable Switch Binding.
Cannot disable Insistent Domain ID while Fabric Binding is active.
User attempted to disable the Insistent Domain ID parameter
through the Configure Switch Parameters dialog box, but Fabric
Binding is enabled.
Disable Fabric Binding through the Fabric Binding dialog box before
disabling these parameters.
Cannot enable beaconing on a failed FRU.
Occurs when selecting Enable Beaconing option for a failed FRU.
Replace FRU and enable beaconing again or enable beaconing on
operating FRU.
Cannot enable beaconing while the system error light is on.
Beaconing cannot be enabled while the system error light is on.
Select Clear System Error Light from Product menu to clear error light,
then enable beaconing.
Cannot have spaces in field.
Spaces are not allowed in this field.
Product Manager Messages
Product Manager Messages
A
A-3