Switch Binding Membership List Dialog Box - McDATA Sphereon 4500 User Manual

Switch Binding Membership List Dialog Box

Figure 6-2
Refer to
information on how the Switch Membership List is populated with
WWNs according to options set in the Switch Binding State Change dialog
box.
2. If nicknames are configured for WWNs through the EFC Manager
and you want these to display instead of WWNs in this dialog
box, click the Display Options button at the bottom of the dialog
box. When the Display Options dialog box displays, click
Nickname, then OK.
3. To prohibit connection to a switch port from a WWN currently in
the Membership List, click the WWN or nickname in the
Membership List, then click the Remove button. The WWN or
nickname will move to the Node List panel. WWNs can only be
removed from the fabric if any of the following is true:
• The switch is offline.
• Switch Binding is disabled.
• The switch or device with the WWN is not connected to the
switch.
Configuring Switch Binding - Overview
Optional Features
on page 6-4 for
SANtegrity Features
6
6-7