Configuring the Switch
3
Procedure
McDATA® Sphereon™ 4500 Fabric Switch Product Manager User Manual
3-28
This file cannot be used to set configuration parameters through the Product
Manager.
Data in the file includes:
•
Product identification
Data input into the Configure Identification dialog box.
•
Operating parameters
Data input into the Operating Parameters (Switch and Fabric) dialog
box.
•
Port parameters
Data input into the Configure Ports dialog box.
•
SNMP parameters
Data input into the Configure SNMP dialog box.
•
Active zoning configuration
This specifies the active zone and zone members, if set, and
whether the default zone is enabled or disabled.
To export a configuration report:
1. Select Export Configuration Report from the Configure menu on the
menu bar.
The Export Configuration Report dialog box displays.
Export Configuration Dialog Box
Figure 3-15
Details
File List
Create New
Folder
Home
Go Up One Level
Drive List