Hellenbrand ProMate Series Owner's Manual page 26

ITEM NO.
ORDER NO.
1 102141
2-4 102051
3 102687
4 102165
5 102321
*Order number 102051 includes 102687 and 1102165, which are item
numbers 3 & 4.
**Only used if metering is not to be done (time clock units)
The nuts and caps are designed to be unscrewed or tightened by hand or
with the special plastic wrench. If necessary a pliers can be used to un-
screw the nut or cap. Do not use a pipe wrench to tighten or loosen nuts or
caps. Do not place screwdriver in slots on caps and/or tap with a hammer.
Bypass Valve
ITEM NO. ORDER NO.
1 102141
2 102437
3 102165
4 102450
5 V3146
6 V3147
7 109479
8 102159
9 102161
10 102160
(Not Shown) Bypass Vertical Adapter Assembly
ORDER NO. DESCRIPTION
102141 Nut 1" Quick Connect
102437 Split Ring
102165 O'Ring 215
106858 Bypass Verticle Adapter
The nuts and caps are designed to be unscrewed or tightened by hand or with the
special plastic wrench. If necessary a pliers can be used to unscrew the nut or cap.
Do not use a pipe wrench to tighten or loosen nuts or caps. Do not place screwdriver
in slots on caps and/or tap with a hammer.
Do not use pipe dope or other sealants on threads. Teflon tape must be used on
threads of the 1" NPT connection and on the threads for the drain line connection.
Teflon tape is not necessary on the nut connection nor caps because of o-ring seals.
26
WATer MeTer AnD MeTer PluG
DESCRIPTION
Nut 1" QC
Meter Assy.
Turbine Assy.
O-ring 215
Meter Plug Assy.**
DESCRIPTION
Nut 1" Quick Connect
Split Ring
O'Ring 215
Bypass 1" Rotor
Bypass Cap
Bypass Handle
Bypass Rotor Seal Retainer
O-Ring 135
O-Ring 112
O-Ring 214
QTY
2
2
2
2
QTY.
1
1
1
1
1
bYPASS vAlve
QTY
2
2
2
2
2
2
2
2
2
2
Figure 20
Figure 21