Bicycle Settings (Bike Set) - Polar Electro CS200 User Manual

5.4 BICYCLE SETTINGS (BIKE SET)

You can set two bike preferences for the cycling computer. Prepare the settings for both bikes; when you start exercise
recording, just select bike 1 or 2. For both bikes you can prepare the following settings:
• AutoStart on/off The AutoStart function starts or stops automatically the exercise recording when you start or
stop cycling.
• Cadence on/off A wireless cadence sensor measures the speed at which you turn the pedals of your bicycle.
• Wheel Wheel size settings are a prerequisite for cycling information.
For further information, see the following page.
1. In theTime mode, press the RIGHT button until SETTINGS is displayed.
2. Press the MIDDLE button. Cycling SET is displayed.
3. Press the RIGHT button until Bike SET is displayed.
4. Continue by pressing the MIDDLE button and follow the steps below:
The display reads: Press the RIGHT button to set the fl ashing value
RIGHT
5. Bike 1 / 2
• Select which bike settings you want to set:
6. AutoStart RIGHT
On / OFF • Turn AutoStart function on or off.
7. Cadence RIGHT
On / OFF • Turn cadence function on or off.
8. Wheel RIGHT
• Adjust the wheel size (mm) of your bicycle.
• To return to the Time mode, press and hold the LEFT button.
Note:
• The wheel size is always indicated in millimeters, as it is more accurate.
• The speed and distance measuring functions are always on.
46 – ENGLISH
bike 1 or 2.
ENGLISH
Press the MIDDLE button to accept
the value
MIDDLE
MIDDLE
MIDDLE
MIDDLE
ENG
– 45