4. SET CRANK LENGTH
Before starting training for the first time, set your crank
length on the left transmitter. Press and hold the button
on the left transmitter for 5 seconds to access the crank
length selection mode (green battery light blinks 5
times). Press the button for 1 second to change the
crank length. When the correct crank length light is
static, wait for 10 seconds to have the crank length
stored.
There are four possible crank lengths. These are 170
mm, 172.5 mm, 175 mm and 177.5 mm. The default
value is 172.5 mm.
To change the selected crank length at any time, press
and hold the left transmitter button for 5 seconds to
access the crank length selection mode.
When switching the transmitters and pedals from one
bike to another, make sure the correct crank length is
chosen.
ENGLISH
Set Crank Length
9